netgear wifi extender

Netgear Wifi Extender Setup

Dead spots may appear at random and Wi-Fi connection can vary throughout the day. A lot of people suffer from a slow Wi-Fi connection around their premises. Poor Wi-Fi can become annoying and frustrating sometimes. To remove black spots and improve Wi-Fi performance, you can install the Netgear wireless range extender around your property. Netgear wireless range extender is the most convenient way of boosting Wi-Fi coverage to every corner of your home. Netgear range extender receives the wireless signals from your router and retransmits it in the dead zone areas. Netgear wifi extender is not expensive and is compatible with almost all routers. Here you can setup netgear wifi extender using mywifiext.rangerange

Where to Position a Netgear Range Extender?

Dead spots may appear at random and Wi-Fi connection can vary throughout the day. A lot of people suffer from a slow Wi-Fi connection around their premises. Poor Wi-Fi can become annoying and frustrating sometimes. To remove black spots and improve Wi-Fi performance, you can install the Netgear extender around your property. Netgear wireless range extender is the most convenient way of boosting Wi-Fi coverage to every corner of your home. Netgear extender receives the wireless signals from your router and retransmits it in the dead zone areas. Netgear extender is not expensive and is compatible with almost all routers.

Setting Up the Netgear Wifi Range Extender

A New extender setup is very easy and it takes less time. The installation and configuration of the Netgear extender can be done through either a web interface or a WPS button. To configure the advanced settings of your device, you need to access the Netgear’s web-management page using www.mywifiext.net. Netgear provides an application named as Netgear Wi-Fi Analytics App. Using this app, you can easily check the network status and the Wi-Fi signal strength.

Netgear Extender Setup using mywifiext.net

Here are the steps to set up the Netgear extender:

1.

Put the power adapter into a power outlet to provide power to your Netgear extender. Wait for the power LED to turn solid green. Next, use any wireless device such as a computer, laptop to connect to the network name of your extender. The device’s LED light up as soon as the wireless device gets connected to the Netgear extender.

2.

Now, launch a web browser such as Microsoft Internet Explorer on your computer. Type www.mywifiext.net the default web address in the address bar of the browser. Hit the enter key.

3.

Click on the “new extender setup”. Fill in the required fields given on the screen and click on the continue button. A list of available Wi-Fi names will display on the screen. Click on the Wi-Fi name that you want to extend. Click ‘Next’.

4.

Enter the Wi-Fi password or passphrase for the selected network. Now, enter the network name of your extended network and select the security type for the same. Choose a strong and advanced security standard i.e. WPA/WPA2. Now, you can connect your devices to the extended network. Click on the continue button.

5.

Next, a registration window will display. Fill up the necessary information if you want to register your product and click next. Otherwise, you can skip the registration process. The registration is required only when you want to take support from the Netgear technicians.

Key features of the Netgear Extenders

WPS Supported

Almost all the Netgear extenders have built-in WPS push button. You can easily connect to the network using the WPS button.

Smart LED Indicators

Netgear extenders have LED indicators for power, WPS, and LAN.

Ethernet ports

You can use the Ethernet ports to connect the external devices like a game console, smart TV, etc. to the extender.

Compatibility

Most of the Netgear extenders are compatible with the advanced wireless standard 802.11 b/g/n.

Updating the Firmware of the Netgear Range Extender

When you log into the Netgear extender configuration page, the latest firmware appears automatically. Here are the steps to check and update the Netgear firmware:

  1. Open a web browser and type mywifiext.net in the URL bar.
  2. Hit the enter button to open the Netgear extender login page.
  3. Log in by typing in the username and password in the given fields.
  4. You can use the default credentials if you have not changed them yet. Look for the default login details in the device’s user manual or at the extender’s back panel.
  5. The basic home page of the extender displays.
  6. From the menu, select the ‘Maintenance’ tab. Select ‘Firmware Upgrade’. Click on the ‘check new firmware’. If the latest firmware is available then download it on your computer.
  7. Now, click the ‘Browse’ button to upload the firmware from your desktop. It will take a few minutes to complete the firmware update process.
wireless range extender

Updating the Firmware of the Netgear Range Extender

While setting up the Netgear wireless extender you might encounter an error that is ‘can’t access mywifiext.net’. The main reason for this error is that it might not be your regular website. In case, you can use the Netgear extender setup wizard to open the settings. To gain access to the local web address, make sure that your computer is connected to the NETGEAR extender.

You can follow the below-given steps to resolve this issue:

While setting up the Netgear wireless extender you might encounter an error that is ‘can’t access mywifiext.net’. The main reason for this error is that it might not be your regular website. In case, you can use the Netgear extender setup wizard to open the settings. To gain access to the local web address, make sure that your computer is connected to the NETGEAR extender.

  • Make sure that the Netgear extender and your router reside in the same room during the setup. Once the setup is completed, you can place them separately.
  • Check the status of all the LEDs on the Netgear range extender.
  • Check whether the power LED on the Netgear extender is blowing. It will ensure the extender is getting the proper power supply.
  • Make sure the Ethernet cable from the computer is securely plugged into the Netgear device.
  • Now, search for the Netgear extender default IP address which is 192.168.1.250.
  • In case, the problem still exists, close your current browser and use another web browser.
  • Try putting the default address in the browser’s address bar rather than the search bar.
  • Configure the proxy or TCP/IP settings on your computer system.
  • Now, connect to the mywifiext.net. If the problem is not resolved yet then contact the Netgear support expert to resolve this issue.

Netgear Extender fails to find the existing router’s name

The Netgear extender may not recognize the existing SSID if the router is set on the Dynamic frequency selection (DFS) channel. There is a possibility that it is not visible in the list of extended network channels. Follow the below steps to resolve the error:

  • You must place your Netgear wireless range extender within 5 feet distance from the router.
  • Check if your existing router is DFS certified or not. Most of the dual-band router support DFS.
  • Access the Netgear router’s web interface to find out the particular bandwidth and frequency section.
  • Try changing the router’s channel either to 36 – 48 or to 149 – 165, in both the above cases i.e. Auto or DFS channel.
  • Once done, refresh the network list and check the SSID is visible in the list of extended network names.
netgear wifi extender